This could be a breathtaking event. If skies are clear, will see the color of the moon change from a silvery white to a coppery red. So get out your cameras and let’s capture some moon light.
Shooting a blood moon can be a real challenging event. When the moon turns that bright coppery or red color getting a proper exposure can be a little tricky. Here are some basic tips for shooting a lunar eclipse.
1. Location, Location, Location.
Try and find a area away from light polluted areas such as large cities. the darkest skies will produce the cleanest shots. I use ClearDarkSky,com for scouting locations. If you live on the west coast of the United States, you’ll have a full view of the event, so finding a good location should be easy.
2. A Really Long Lens
You really do need the longest lens available to you.. You are going to need at least a 300mm lens or longer to get good results. Anything shorter and it will render too small of a image of the moon to be really usable. In this case, size really does matter.. (sorry, bad pun). If you don’t have a long lens, you could either borrow from a friend, or even rent one from borrowlenses.com or lensrental.com
This goes without saying, but shooting at night will require a good sturdy tripod. Long lens and slow shutter speeds all dictate the need for a good sturdy tripod. Tripod tip: weigh your tripod down with a backpack or heavy bag. Most tripods have a small hook on the center shaft to hang a bag from. A good travel tripod for the money is the MeFoto RoadTrip!
4. Use A Cable Release or Self Timer
5. Prefocus on Infinity
Turn off your cameras autofocus, and prefocus on infinity. Autofocus is not reliable at night. You can prefocus on the full moon before the eclipse, then switch to manual focus thus, locking focus at infinity,I recommend manual focus using live view.
6. Use the mirror-lock-up feature of your camera
Locking up the mirror will great improve your chances of getting a tack sharp image. You would surprised how much vibration a mirror operation can have on your image.
7. Shoot Faster Than you think - Shutter Speed
You’ll really be surprised on how fast the moon moves in the sky.. Your shooting with a long lens and you will need at least 1/50th of a second for a clean shot. Realistically, I like to shoot around 1/250 of a second for a nice tack sharp image. Adjust you ISO to obtain faster shutter speeds.
That turns us to the final question, exposure settings. Now there is just no hard and fast rule for lunar eclipses, Each lunar event differs greatly, I can only give you a starting point.
At Total Eclipse I would start with the following camera settings
1/2 second shutter speed
Take a couple of test shots and adjust from there. Remember, the total eclipse will last almost a hour, so you’ll have time to adjust, don’t rush.. And most of all, have fun!
It’s time to prepare for a major event. For the blood moon is coming! People across north america, can experience a total lunar eclipse. For people living on the west coast, the event will begin around 1:17a.m. on Oct 8th where we will see the moon slip into Earth’s shadow. The full eclipse starts at 3:27 a.m. Oct 8th, and the eclipse ends at 4:22 a.m.
This could be a breathtaking event. If skies are clear, we will see the color of the moon change from a silvery white to a coppery red. So get out your cameras and let’s capture some moon light.